MEN'S

TREKKING SEVERAL DAYS

2 Years

These boots, which have been laboratory and field tested, are equipped with a waterproof membrane that provides optimum waterproofing and breathability. To start, the footwear is immersed in water with pressurised air inside to check that no bubbles form on the surface of the boot. Next, shoes are fitted to a mechanical arm that simulates walking, half immersed in water so we can test that the inside remains perfectly dry.

In our waterproofing tests, we test 3 levels of waterproofing: 2000 flexions (approximately 4 km walk) 4000 flexions (approximately 8 km walk) 8000 flexions (approximately 16 km walk). Naturally, when the product has dried after this test or in use, it regains its original waterproofing.

The TREK 500 boot has passed the waterproofing test involving 8000 flexes, i.e. 16 km of walking in water up to the middle of the upper.

Laboratory tests were conducted to test the following elements: - attachment of eyelets and webbing - sole assembly - toxicology - UV resistance - abrasion of the sole and upper components - accelerated ageing.

Use a brush and/or a sponge to clean the shoe and remove dirt or mud residue. Then, air dry away from a heat source. Finish with a nourishing cream to maintain the flexibility of the leather and extend the lifespan of the shoe.

Try on both shoes, while standing, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: the base of the heel and the forefoot when going downhill. There should be no pressure points when trying them on. Feel free to walk around the store. Gradually start using you shoes during your first few hiking trips to break them in.

Trek 500 boots are made in the European Union, in Romania. Most of the materials are of European origin.

Store in a dark, dry and well-ventilated place.

The wearing comfort and comfort in use of all our boots are tested by users who are representative of the people the products are designed for, under the same conditions you would encounter in use. In particular, our "Mission Tests" bring together the product manager with people who aren't affiliated with QUECHUA to test, improve and validate our products.

Outer sole of : 60.0% Thermoplastic Polyurethane, Outer sole of : 40.0% Polyurethane Upper of : 100.0% Leather - Cow Lining and sock of : 80.0% Polyester, Lining and sock of : 20.0% Leather - Bovine

These boots, which have been laboratory and field tested, are equipped with a waterproof membrane that provides optimum waterproofing and breathability. To start, the footwear is immersed in water with pressurised air inside to check that no bubbles form on the surface of the boot. Next, shoes are fitted to a mechanical arm that simulates walking, half immersed in water so we can test that the inside remains perfectly dry.

In our waterproofing tests, we test 3 levels of waterproofing: 2000 flexions (approximately 4 km walk) 4000 flexions (approximately 8 km walk) 8000 flexions (approximately 16 km walk). Naturally, when the product has dried after this test or in use, it regains its original waterproofing.

The TREK 500 boot has passed the waterproofing test involving 8000 flexes, i.e. 16 km of walking in water up to the middle of the upper.

Laboratory tests were conducted to test the following elements: - attachment of eyelets and webbing - sole assembly - toxicology - UV resistance - abrasion of the sole and upper components - accelerated ageing.

Use a brush and/or a sponge to clean the shoe and remove dirt or mud residue. Then, air dry away from a heat source. Finish with a nourishing cream to maintain the flexibility of the leather and extend the lifespan of the shoe.

Try on both shoes, while standing, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: the base of the heel and the forefoot when going downhill. There should be no pressure points when trying them on. Feel free to walk around the store. Gradually start using you shoes during your first few hiking trips to break them in.

Trek 500 boots are made in the European Union, in Romania. Most of the materials are of European origin.